View FTR-B2NA45Z_1243270.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4 POLE (2 FORM C+ 2 FORM A) SIGNAL RELAY FOR CENTRAL SWITCHING/ DATA TRANSMISSION FTR-B2 Series
s FEATURES
q
RoHS Compliant
4 POLE MINIATURE RELAY Mounting space of 175mm2 with 4 pole relay, suitable for high density mounting. q SAFETY STANDARD - UL/CSA recognized - Conforms to Bellcore specification & FCC part 68 - Conforms to IEC 60950 / UL1950 / EN60950 spacing and high breakdown voltage Clearance: 1.0mm Creepage: 1.6mm q HIGH RELIABILITY Bifurcated gold overlay silver alloy q HIGH HEAT RESISTANCE, FLAMMABILITY Flammability grade of 94V-0 materials employed q AIR TIGHT CONSTRUCTION Air tight construction allows high resistance to various environments and to clean the relay q SMT VERSION Surface mount type available on request q RoHS compliant since date code: 0430B8 Please see page 7 for more information
N
O
T
FO
R
N
EW
D
s ORDERING INFORMATION
[Example] FTR-B2 (a) M A 012 Z - ** (b) (c) (d) (e) (f )
FTR-B2 M : 2 Form C + 2 Form A - through hole N: 2 Form C + 2 Form A - SMT A : Standard (400mW) 4.5: 4.5VDC 012: 12VDC Z : Gold overlay silver alloy
ES
IG
(a) Series Name (b) Contact Arrangement (c) Coil Type (d) Coil Nominal Voltage (e) Contact Material (f) Custom Designation
N
Special Number for Customized Products
Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking FTR-B2MA012Z B2MA012Z
1
FTR-B2 Series
s SAFETY STANDARD AND FILE NUMBERS
UL508, 1950 (File No. E63615) C22.2 No. 14, No. 950 (File No. LR40304) Please request when the approval markings are required on the cover.
Nominal voltage 4.5 to 12 VDC 0.2 A 1A 0.3 A Contact rating 125 VAC 30 VDC 110 VDC resistive
Clearance
N
1.0mm coil a- contacts
O
Creepage
Remarks - working voltage: 150V - relay inside and outside - pollution degree "2"
T
1.6mm coil - contacts
s COIL DATA CHART
MODEL FTR-B2 ( ) A4.5Z FTR-B2 ( ) A012Z
Nominal Voltage 4.5VDC 12VDC
FO
R
Coil Resistance 50 355
Operate Voltage 3.38VDC 9.0VDC
Release Voltage Nominal Power 0.45VDC 1.2VDC 400mw 400mw
N
EW
D
ES
IG
N
2
FTR-B2 Series
s SPECIFICATIONS
Item Contact Arrangement Material Resistance (initial) FTR-B2 Series 2 Form C + 2 Form A Gold overlay Silver alloy Maximum 75m (at 1A 6VDC) 30VDC 1A / 125VAC 0.2A 30W / 25VA 110VDC / 125VAC 1A 1.25A
N
Time Value Coil Insulation
Rating (resistive)
O
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current Maximum Carrying Current
T
Operate Time (at nominal voltage) Maximum 10ms Release Time (at nominal voltage) Maximum 5ms Operating Temperature -40 C to +85 C (no frost)
FO
R
Resistance (at 500VDC) Dielectric Strength
N
Minimum 1,000 M
Life
Mechanical Electrical
EW
750 VAC 1 Min. (open contacts) 500 VAC 1 Min. (adjacent contacts) 1,500 VAC 1 Min. (coil-contacts)
10 x 106 operations minimum
50 x 103 operations minimum at 30VDC 1A 100 x 103 operations minimum at 125VDC 0.2A 10-55 Hz (double amplitude of 1.5mm) 10-55 Hz (double amplitude of 1.5mm) 100m/s2 (111ms) 500m/s2 (61ms) Approximately 3.9g
Vibration
Misoperation Endurance Misoperation
D
Shock Endurance Weight
ES
IG
N
3
s CHARACTERISTIC DATA
Coil Temperature Rise (C)
10
8
6
4
2
0
0
3
,
N
0.2
FTR-B2 Series
Nominal Voltage Multiplying Factor (%)
Operation (return time characteristics)
Coil Temperature Rise
80
2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0
Ambient Temperature
(maximum applied voltage, operating voltage characteristics)
60
ren A t: 1 nt: 0A
Time (ms)
Co
Co nta
nta
ct
ca
40
Co nta c ct
Operation time
ar
n ryi
gc
ur
rry
ct c
ing
urr
arr
cu
Coil Power (W)
O
0.4
20
n Co
tac
tc
arr
yin
gc
e urr
yin
rre
gc
nt:
0A
ent
: 1A
Operating Voltage (hot coil) Operating Voltage (cool coil)
20 40 60 80 100
Release
T
0.6
0.8
0
0.2
0.4
0.6
0.8
Coil Power (W)
Ambient Temperature (C)
Maximum Switching Power
FO
Life Curve
Contact Current (A)
Operation (x104)
2
DC Resistive
R
100 50 30 20 10 5 0
1
0.5 0.4 0.3 0.2
AC Resistive
N
0.2
125 VAC Resistive
0.1
1
5
10
30 50
100 200
0.4
EW
0.6 0.8
30 VDC Resistive
1.0
s REFERENCE DATA
Nominal Voltage Multiplying Factor (%)
Q~ P Q Q~ ~P
Contact Voltage (V)
Distribution of Operate and Release Voltage
FTR-B2MA4.5Z n=100 Operate Release
Contact Current (A)
D
1.2
ES
100
100
Distribution of Operate and Release Time
FTR-B2MA4.5Z n=100 Operate Release
Distribution of Contact Resistance
100
IG
10 20
Distribution (%)
Distribution (%)
80
60
Distribution (%)
80
80
N
40
FBR-B2MA4.5Z n=100 Break Make
60
60
40
40
40
20
20
20
0
10 20 30 40 50 60 70 80 90 100
0
1
2
3
4
5
6
0
30
50
60
70
Time (ms)
Contact Resistance (m)
4
FTR-B2 Series
s REFERENCE DATA
Nominal Voltage Multiplying Factor (%)
Contact Nominal Voltage Resistance (m) Multiplying Factor (%)
Mechanical Life Test
4.0 Operating Voltage 3.0 2.0 1.0 Release Voltage FBR-B2MA4.5Z n=10 1200 operations/min.
Nominal Voltage Multiplying Factor (%)
Electrical Life Test
4.0 Operating Voltage 3.0 2.0 1.0 0 500 200 100 50 20 10 5 2 Release Voltage FBR-B2MA4.5Z n=10 30 operations/min. 125 VAC 0.2A (resistive load) Make Break Initial 10
Electrical Life Test
4.0 Operating Voltage 3.0 2.0 1.0 0 500 200 100 50 20 10 5 2 Initial Release Voltage FBR-B2MA4.5Z n=10 30 operations/min. 30 VDC 1A (resistive load) Make Break 5
0 500 200 100 50 20 10 5 2
N
1 Initial
Operation (x104)
O
5 10
Make Break
T
50 100
500 1000
Contact Resistance (m)
Contact Resistance (m)
Operation
(x104)
Operation (x104)
s DIMENSIONS
q Dimensions
FO
R
Through hole type
N
q Schematics (BOTTOM VIEW)
EW
q PC board mounting hole layout (BOTTOM VIEW)
Orientation mark
D
q Dimensions
q Schematics (TOP VIEW)
Surface mount type
ES
q PC board mounting hole layout (TOP VIEW)
IG
N
Orientation mark
5
FTR-B2 Series
s RECOMMENDED CONDITION (Temperature Profile)
IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering)
Temperature (C)
T3 T2 T1 preheating
soldering
T 3 = 245C max. T 2 = 200C max. cooling T 1 = 165C max.
Temperature (C)
215C maximum soldering T3 T2 T1 preheating cooling
T 3 = 200C maximum T 2 = 165C maximum T 1 = 100C maximum
0
N
120 sec maximum
O
Note:
1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method.
T
16
30 sec Max.
0 60 sec Max.
60 sec Max. 90 sec Max.
FO
2 4
s PACKAGING
Tape dimensions o 1.55 o 2.2
R
14.2
N
28.4 32
EW
0.4
1.75
D
17.9
10.7 11.7 Tape feeding
ES
Reel Dimensions
IG
N
o 380
Top cover tape Embossed carrying tape Perforation Parts box
Dimensions: mm General tolerance: 0.2 Quantity of one reel: 250 pieces
o 13
6
FTR-B2 Series
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf) q Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays. q Most signal and some power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE). q It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). q "LF" is marked on each outer and inner carton. (No marking on individual relays). q To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. We will ship leaded relays as long as the leaded relay inventory exists.
q
N
O
2. Recommended Lead Free Solder Profile
q
T
Recommended solder paste Sn-3.0Ag-0.5Cu and Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005)
Reflow Solder condtion
FO
R
Flow Solder condtion:
Peak Temp.: max. 250C Soldering
250
N
Pre-heating: Soldering:
temperature (C)
220 Pre-heating
EW
maximum 120C dip within 5 sec. at 260C soler bath
Solder by Soldering Iron:
Cooling
170 130
D
Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec.
90~120 sec. max. 120 sec.
20~30 sec.
(duration)
ES
IG
We highly recommend that you confirm your actual solder conditions
N
3. Moisture Sensitivity
q
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
q
SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house test.
5. Solid State Relays
Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating is between the terminal and the Sn plating to avoid whisker.
q
7
FTR-B2 Series
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
Fujitsu Components International Headquarter Offices
N
(c) 2005 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 06/07/2005.
O
T
FO
R
N
EW
D
ES
IG
N
8

▲Up To Search▲

Price & Availability of FTR-B2NA45Z

	To Download FTR-B2NA45Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .